Technical Literature

Material Specification

  • ALLOY STEEL/CARBON STEEL. : ASTM A 234, A105, A516
  • STAINLESS STEEL : ASTM A 403, A815, A182, A240
  • LOW TEMPERATURE SERVICES : ASTM A 420, A350
  • SPECIAL MATERIAL OF FITTINGS : ASTM A860, Gr. WPHY 42/46/52/56/60/65/70

Material Grade widely used.

  • CARBON STEEL – ASTM A234 GR.WPB / WPC, ASTM A106 GR. A, B, C
  • LOW TEMPERATURE SERVICE – ASTM A 420 GR. WPL6 / WPL3
  • ALLOY STEEL – ASTM A234 GR. WP1, WP5, WP9, WP11, WP22, WP91
  • STAINLESS STEEL – ASTM A 403 GR.WP304, 304L, 310, 316, 316L, 321, 347

Dimensional Standard

  • ANSI B16.9 – For Factory-Made Wrought Butt Welding Fittings.
  • ANSI B16.11 – For Forged Fittings, Socket-Welding and Threaded
  • ANSI B16.5 – Pipe Flanges and Flanged Fittings

Production Range

Sr. No. Product Seamless Fittings Welded Fittings
Size Thickness Size Thickness
1 Elbows 1” to 24” Sch. 5 to XXS 2” to 48” Sch.10 to XXS
2 Return Bend 1” to 24” Sch. 5 to XXS 2” to 48” Sch.10 to XXS
3 Tee 1” to 24” Sch. 5 to XXS 2” to 48” Sch.10 to XXS
4 Reducers 1” to 24” Sch. 5 to XXS 2” to 64” Sch.10 to XXS
5 Caps / Dish End 1 ½” to 24” Sch. 5 to XXS 2” to 64” Sch.10 to XXS
6 Stub Ends 2” to 24” Sch. 5 to XXS 2” to 48” Sch.10 to XXS
 

TECHNICAL HIGHLIGHTS

TECHNICAL: Our concentration to achieve optimum level of quality product with continuous watch by our team of technical expert on Destructive/Non Destructive testing of our entire products. TESTINGS : During inward of raw material random per heat/length/lot. PROCESS : During Process :- Non Destructive Testing (NDT) + Dimensional + Visual with surface test. PRODUCT : Final Non Destructive Testing (NDT) / Destructive witness by our Q.A. as well as party / T.P.I. EXTRA CARE : Our products are carefully killed / Heat-treated with cycle heating as per the relevant MOC code with induction heating (Electric furnace). CALIBRATION: Machineries / Scales / Measuring Instruments / Electro Mechanical Instruments are calibrated periodically TRACEBILITY : Traceability is an essence of the product supplied even after significant tenure. Having given a reference of Lot No./Heat no. or D.C No./ T.C. No. – the history of the material/product supplied can be identified. OATH : Uncompromisingly eagle eye to keep our product defect free – QA Department.